Daily use and maintenance instructions of fiber laser cutting machine
Fiber laser cutting machine is a laser cutting machine that uses a fiber laser generator as a light source. Fiber laser is a new type of fiber laser. The laser head outputs a laser beam with high energy density and gathers it on the surface of the workpiece, so that the area irradiated by the ultra-fine focus spot on the workpiece is instantly melted and vaporized, and the spot irradiation position is moved by the numerical control mechanical system. And realize the automatic cutting of non-contact processing, with high speed and high precision.
However, fiber laser cutting machines are not omnipotent, and they also have their own limitations, such as material property limitations for processing, strict processing specification requirements, etc.
The processing category of fiber laser cutting machine mainly belongs to metal laser cutting machine. The types of cutting metals include stainless steel, carbon steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized sheet, galvanized sheet, pickling sheet , copper, silver, gold, titanium and other metal sheet and pipe cutting. However, with the development of science and technology, the technology in non-metal cutting such as plastics, composite materials and plexiglass has also matured.
Secondly, fiber laser cutting machine is not recommended for long-term cutting of rare metal materials such as aluminum and copper, because these materials are highly reflective materials, which will increase the consumption of consumables. Finally, the cutting thickness of the fiber laser cutting machine changes according to its power. The higher the power, the greater the cutting thickness; the thinner the metal material, the faster the cutting speed. The fiber laser cutting machine has obvious advantages for thin plate cutting.
In the process of use, it is necessary to process and maintain the machinery frequently, so as to prolong the service life of the machinery and improve the working efficiency of the equipment to the greatest extent.
First of all, the steel belt must be checked frequently, and the tension of the steel belt must be ensured when the equipment is running. Otherwise, once there is a problem in operation, there is a high possibility of injuring people and seriously affecting the safety of production. Secondly, it is necessary to use a vacuum cleaner frequently to suck out the surface and internal dust of the cutting machine to ensure the cleaning between the mechanical parts and better maintain the normal operation of the parts.
In addition, it is also necessary to lubricate the racks, guide rails and many parts of the cutting machine from time to time, which can stabilize the accuracy of the gear engagement during operation. The operation of the machine is always in the normal running track, and the precision of the cut product is of course higher.
While doing a good job in the daily maintenance of the equipment, it is also necessary to carry out strict inspections when purchasing the equipment and its parts, so as to fundamentally ensure the normal production of the machinery. At the same time, if any parts are found damaged during the use of the machine, they must be replaced in time, which is not only a kind of protection for the machine itself, but also ensures that the laser cutting machine always maintains an ideal cutting effect.
