Fiber Tube Cutting Machine 3D Nozzle M8 Cutting Nozzle 3D Laser Cutting Machine Nozzle Robot Laser Machine Cutting Nozzle
1. The cut pipe is not completely cut through.
The common reason is that the laser nozzle model of the laser pipe cutting machine does not match the thickness of the pipe, and the laser nozzle needs to be replaced; it may also be because the cutting speed set by the laser pipe cutting machine is too fast, which requires reducing the line speed of the laser pipe cutting machine. .
2. The cut workpiece has burrs.
It may be that the laser focus of the laser tube cutting machine is not positioned correctly up and down, and it can be calibrated before use; it may be caused by the insufficient output power of the laser tube cutting machine, check whether the laser generator is working properly; it may also be the laser tube cutting machine The line speed of machine cutting is too slow, so it is necessary to increase the cutting line speed at this time.
Reasons for the heating of the nozzle of the laser pipe cutting machine:
1. Is the cooling air (cooling water) of the laser nozzle turned on? whether the requirements are met.
2. The laser focusing optical path may be offset, and part of the laser is irradiated on the nozzle.
3. The diameter of the laser nozzle is partially blocked or polluted. The nozzle of the laser pipe cutting machine is hot, and the following measures can be taken to solve it
Solution to the heating of the nozzle of the laser pipe cutting machine
1. Check whether the cooling air is turned on, and turn it on if it is not turned on.
2. Check whether the focus is correct, if not, adjust it.
3. Check whether the nozzle is blocked, and clean it if it is blocked.
4. Do not work continuously for a long time, and let the equipment cool down regularly.
