Medical tubes can be subdivided into special-shaped tubes, single-lumen tubes, multi-lumen tubes, etc., which cannot be done with traditional equipment for high-precision processing and drilling, and need to be processed by high-tech laser drilling machines.
Laser drilling is the best of all drilling equipment at present. The principle of laser drilling is to use a metal laser with a solid fiber module as an excitation source to output a laser beam with high energy density and focus it on the surface of the workpiece, so that the workpiece is covered with light spots. The irradiated area melts and vaporizes locally and instantaneously, resulting in the formation of cavities.
This processing method is very fast, the action time is only 10-3-10-5s, and the efficiency is 10-1000 times that of traditional punching equipment. It is very easy to punch several holes per second during processing. The equipment adopts automatic punching throughout the process. Equipped with a self-service feeder, it realizes mechatronics and effectively saves labor costs.
The frequency, pulse width, table moving speed, and moving direction of the pulsed laser required for laser drilling of medical tubes can be controlled by PLC or industrial PC. The operation is convenient and easy to learn. Burrs, no pollution, is a safe and clean processing mode.
Laser drilling of medical tubes is a non-contact vacuum processing process. The laser head does not contact the surface of the material, which avoids extruding the workpiece, processing without consumables, and reducing the cost of mold production and maintenance. Not only that, laser drilling uses its own sensing The positioning system can maintain the distance between the laser head and the material at all times, so that it can punch any pattern or special-shaped holes on irregular surfaces such as inclined surfaces and concave-convex surfaces.
The laser drilling speed of the medical tube is fast, high efficiency and good quality. The minimum hole can be 0.001mm. After processing, the appearance is smooth and the hole size is neat and uniform. The finished product can be finished in one processing without subsequent rework. It is a very convenient processing method. A must-have machine for difficult drilling.
