Plasma laser cutting machine fume treatment generally uses the cartridge dust collector, will be in the laser cutting machine cutting bottom to open a suction port, so that the cartridge dust collector duct can be directly connected to the suction port, reasonable, convenient and fast processing of fume. This equipment is widely used in various metal welding fume purification, grinding and polishing, metal surface treatment, industrial production, fume and smoke, technical laser cutting fume purification, plasma cutting, grinding fume and dust purification, and precious metal material recovery industry.
Plasma laser cutting machine dust collector advantages are as follows.
1、Power system
Adopt domestic fan brand fan, low noise, strong suction, large flow.
2、 Pulse back-blowing dust cleaning system
cartridge filter core can be reused by cleaning, pulse back-blowing dust cleaning system can spray the cartridge at multiple angles, making it easy to clean the cartridge.
3、Filtration system
The filtration system adopts imported PTFE coated polyester filter media, with smooth surface and easy back-blowing; strong corrosion resistance, service life up to 1-2 years.
4、Intelligent control
The control system sets up various monitoring functions to ensure the safe, reliable and smooth operation of the equipment.
a. Power supply status monitoring: fault phase break over-voltage under-voltage alarm to prevent damage to the motor and electrical components.
b. Gas source status monitoring: alarm for low gas source pressure to prevent incomplete ash cleaning.
c. Filter cartridge status monitoring: real-time monitoring of the use of the filter cartridge, can be set according to the differential pressure automatically blowing back to clear the ash, can also be set to manually clear the ash.
d. Operating temperature monitoring: alarm for high system temperature to prevent safety hazards.
5. Reserved IO interface
IO ports are reserved for the control system to facilitate docking with automation equipment and realize the function of remote operation and monitoring equipment operation.
6、Safe and convenient operation
Plasma laser cutting dust collector is equipped with leakage protection, solid-state relay, 24 V safety voltage control for starting and back-blowing dust cleaning, which is convenient and safe for operation.
