high precision: the positioning accuracy is 0.05mm, and the repeated positioning accuracy is 0.02mm.
the slit is narrow: the laser beam is focused into a very small spot, so that a high power density is achieved at the focus, and the material is heated to the degree of gasification and evaporates to form holes. As the beam moves linearly relative to the material, the holes are continuously formed into narrow slits. The width of the incision is generally 0.10-0.20ram.
the cutting surface is smooth: there is no burr on the cutting surface, and the surface roughness of the incision is generally controlled within Ral2.5;A.
fast speed: the cutting speed can reach 10m/min, and the maximum positioning speed can reach 70m/m/n, which is much faster than the wire cutting speed.
the cutting quality is good: non-contact cutting, the cutting edge is less affected by heat, there is basically no thermal deformation of the workpiece, and the slump formed when the material is punched and sheared is completely avoided, and the cutting seam generally does not require secondary processing.
no damage to the workpiece: the laser cutting head will not contact the surface of the material to ensure that the workpiece will not be scratched.
it is not affected by the hardness of the material to be cut: the laser can process steel plates, stainless steel, aluminum alloy plates, hard alloys, etc., no matter what kind of hardness, it can be cut without deformation.
it is not affected by the shape of the workpiece: the laser processing is flexible, can process any graphics, and can cut pipes and other special-shaped materials.
non-metals can be cut and processed: such as plastic, wood, PVC, leather, textiles and plexiglass.
save mold investment: laser processing does not require molds, no mold consumption, no need to repair molds, saving mold replacement time, thereby saving processing costs and reducing production costs, especially suitable for the processing of large products.
save materials: by using computer programming, products of different shapes can be cut out of the whole board material to maximize the utilization rate of materials.
Shorten the manufacturing cycle of new products: trial production of new products, small quantities, uncertain structure, and subject to change at any time, cannot produce molds at all. Laser cutting machines greatly shorten the manufacturing cycle of new products and reduce mold investment.
