Application of laser welding machine on stainless steel kettle

The kettle is an indispensable daily necessities for modern families. The traditional electric kettle and the kettle body use a fiber laser welding machine. The heat of the fiber welding machine is large. Energy control, the software automatically controls the rotation of the pot body, so that the welding part is firm, the outside of the pot body is not deformed, and it is easy to polish. High-precision stainless steel welding products are aimed at the thin material of the pot body, which is easy to burn through the pot body and cause scrap.

Welding effect

Kettle fiber optic welding machine integrated design, beautiful structure, large output power, good energy stability, easy operation, reliable performance, wide application range and so on. Advantages of kettle optical fiber welding machine: 1. Non-contact processing, no need to add pressure, and small deformation of the workpiece. 2. Using optical fiber, it can be welded in special position, it is difficult to realize the general fixture of high-precision stainless steel. 3. Using optical fiber, the process of realizing production automation and high precision is very simple. 4. Use laser energy real-time feedback control and random waveform control functions. 5. The influence of the kettle fiber optic welding machine on the high quality and stable process of each workpiece.

How to improve the welding quality of laser welding machine?

Improve the welding process and some methods to improve the welding quality of laser welding machines to solve the welding problems of some materials with poor weldability encountered in real work. The welding heat input mainly depends on the two phenomena of embrittlement and cold cracking in the overheated area during the welding process. In most cases, small heat input is used for welding. Preheating is one of the effective methods to prevent cold cracks in welding. The preheating temperature should be appropriate, neither too low nor too high. Post-welding heat preservation and slow cooling is also a frequently used technological measure to prevent the occurrence of cold cracks, and its essence is still to control the welding thermal cycle.

Laser Welded Components

In laser welding engineering, materials with poor weldability are often encountered, which requires the correct selection of welding materials and the adoption of reasonable laser welding process methods and measures to ensure the welding quality and meet the needs of use. With the increasing improvement of science and technology and the rapid development of the manufacturing industry, materials are the backbone of the industry, and new steel grades are emerging; requirements.

Laser Welded Components

In order to obtain good weld metal properties, the available laser welding process uses short arc welding during electrode arc welding to reduce the intrusion of harmful gases in the air into the arc. After the parts are welded, the appearance inspection is qualified. After non-destructive testing, the quality of the welding seam meets the relevant standard requirements. After use, the effect is good, indicating that the welding process of the laser welding machine used is reasonable.