Fscut 2000 Medium Power Laser Cutting Control System
FSCUT2000 is a high-performance open loop laser control system developed independently by Shanghai Friendess Electronic Technology Co., Ltd. It is widely used in the field of metal and non-metal laser cutting. Because of its outstanding performance in the field of medium power fiber laser cutting, it is favored by a large number of high quality customers.
FSCUT2000 laser cutting control system is composed of standard accessories as shown below:
| Description | Model | Amount |
| Motion control card | BMC1604V2 | 1 |
| Terminal board | BCL3766 | 1 |
| 15-Pin cable (2.5m) | C15-2.5 | 2 |
| 37-Pin cable (2m) | C37-2 | 1 |
| 62-Pin cable (2m) | C62-2 | 1 |
| Servo cable (2.5m) | C15-2.5 | 4 |
| Laser software | CypCut | 1 |
| Wireless remote | WKB V6 | 1 |
| CNC panel | BCS100 | 1 |
| Amplifier | BCL-AMP | 1 |
| SPC | SPC-140 | 2 |
Technical parameters:
| Model | FSCUT2000 |
| Motion Control card | BMC1604v2 |
| I/O terminal board | BCL3766 |
| Motor control signal | 4 axis with high-speed pulse output and maximum frequency3MHz |
| 3 axis with encoder feedback channel and four times, frequency up to 8MHz | |
| The original point of every axis with limit, servo alarm special input signal. | |
| The servo performance of every axis, alarm clear special output signal. | |
| Control cycle is 1ms. | |
| Motion control performance | “S” speed-up and speed-down with wave filtering. |
| Velocity look-ahead, inflection point with intelligent speed-up and speed-down. | |
| The speed limit of small circular arc, Local curvature analysis | |
| The smoothing of turning | |
| Laser control signal | Output 1 is PWM signal, with dip switch choosing 24V or 5V |
| Output 2 is 0~10V analog signal. | |
| I/O Function | 12 general inputs. |
| 20 general outputs, thereto, 8 interfaces are relay outputs,12 interfaces are mosfet emitter outputs. | |
| Work environment | Temperature: 0~55℃ |
| humidity: 5%~90%, no condensation Power | |
| Power requirement | 24V DC/2A |
Application:
Applicable to 1500W ~ 6000W medium power fiber laser cutting machine, widely used in fabricating industries of metal workpiece, kitchen utensils, lamps, cabinets and more.
Laser Nozzles Ceramic Holders Collimation/Focus lens Tube Tooling Kits Goggles Ceramic Locker Ring Seal Ring/Washer