How to properly maintain and maintain the laser cutting head laser cutting machine?

Fiber laser cutting is more and more favored and accepted by the manufacturing industry. While fiber laser cutting improves efficiency, in order to better exert the high efficiency and high production performance of fiber laser cutting, it is necessary to pay attention to maintenance at ordinary times. In particular, the cutting head, as an important part of processing, must pay attention to maintenance. The laser cutting head is one of the core components of laser cutting. The quality of the cutting head directly affects the processing quality and efficiency of the laser. Therefore, choosing a cutting head of a good quality brand has a high price, so the maintenance of the laser cutting head in daily use is very important. Good health care not only greatly increases the service life of the cutting head, but also ensures the smooth processing of the cutting head during the production process, effectively guarantees the accuracy of the workpiece, and saves the use of cutting gas and electricity. So how to maintain the laser cutting head? This is divided into two parts: daily maintenance and regular maintenance.

Daily maintenance

1. Every time the machine is turned on, check whether the position of the cutting head is correct, ensure the correctness of the data such as the starting point and height of the laser cutting head, and ensure that accidents such as collisions will not occur during work.

2. Check whether the amount of cut off gas is sufficient. When using air, check whether the pressure of the air pump is sufficient.

3. Check whether the water volume and water temperature of the cooler meet the equipment setting requirements. The water volume during operation should be sufficient to avoid damage to the laser cutting head caused by insufficient cooling water.

4. Check whether the oil circuit, gas circuit, water circuit, piping and joints of various pneumatic components are leaking, and whether each component is in good condition.

Regular maintenance We must make a weekly inspection plan when using, or customize the inspection plan according to the actual frequency of the machine.

1. Regularly check the incision loss of the cutting head, and replace it immediately when the loss is serious.

2. Check the sharpness of the lens of each part of the cutting head and clean it reasonably

3. Check the cleanliness and smoothness of all pipes and joints - to ensure that impurities are not blocked

4. Check whether the fixed parts of the cutting head are loose. Gangchun Laser can only perform regular maintenance of the fiber laser cutting machine for you, so that its performance can be better exerted, and the use time will be longer.