CWFL-3000 water chiller developed by S&A Teyu is made especially for fiber laser cutting applications up to 3KW. It highlights a dual circuit configuration. Two temperatures can be supplied from one single chiller unit for the fiber laser source and the laser cutting head, indicating up to 50% space saving comparing with the two-chiller solution.

Two temperatures can be supplied from one single chiller unit for the fiber laser source and the laser cutting head, indicating up to 50% space saving comparing with the two-chiller solution.

With temperature stability of ±0.5℃, this industrial water chiller is efficient in mitigating the heat that is generated during the fiber laser operation. Reducing the operating temperature can help reduce maintenance and extend the lifespan of the fiber laser system. Being Modbus-485 capable, CWFL-3000 high power water chiller can communicate with the fiber laser very easily.

The warranty period is 2 years.

Features:

1. Dual channel design for cooling fiber laser and the laser head, no need of a two-chiller solution;

2. ±0.5℃ precise temperature control;

3. Temperature control range: 5-35 ℃;

4. Modbus-485 capable, easy communication with the fiber laser system;

5. Constant temperature and intelligent temperature control modes;

6. Built-in alarm functions to avoid water flow problem or temperature problem;

7. CE, RoHS, ISO and REACH compliant;

8. Available in 220V or 380V;

9. User-friendly temperature controller for easy operation;

10. Optional heater and water filter

Specification :

Model:	CWFL-3000ANS	CWFL-3000BNS	CWFL-3000ENS
Voltage:	AC 1P 220V	AC 1P 220V	AC 3P 380V
Frequency:	50Hz	60Hz	50Hz
Unit Power:	4.16kw	4.3kw	4.2Kw
Current:	7.2~23.5A	6.7~22.3 A	2.8 ~16.7 A
Precision:	±0.5°C
Pump power:	1.1kw
Tank capacity:	22L
Lift:	53M
Rated flow	2 L/min+＞20 L/min
N.weight:	95 Kgs
G.weight:	113Kgs
Dimension:	77 X 55 X 103 cm (L X W X H)
Package dimension:	84X 74 X 120 cm (L X W X H)

Note:

1. The working current can be different under different working conditions; The above information is for reference only. Please subject to the actual delivered product;

2. Clean, pure, impurity free water should be used. The ideal one could be purified water, clean distilled water, deionised water, etc.;

3. Change out the water periodically (every 3 months is suggested or depending on the actual working environment);

4. Location of the chiller should be well ventilated environment. There must be at least 50cm from the obstacles to the air outlet which is on the top of the chiller and should leave at least 30cm between obstacles and the air inlets which are on the side casing of the chiller.