The laser cutting machine mainly uses a laser beam to irradiate the surface and release energy to see the steel plate melt and evaporate. Because of the high concentration of energy, rapid local melting and heating can be performed to evaporate the steel plate. Due to the high concentration of energ
Laser cutting perforation technology:Any thermal cutting technique, except in a few cases where it can start from the edge of the board, generally has to make a small hole in the board. Earlier, on the laser stamping compound machine, a punch was used to punch a hole, and then a laser was used to st
What are the advantages of laser cutting technology:First, high precision: the positioning accuracy is 0.05mm, and the repeated positioning accuracy is 0.02mm.Second, the slit is narrow: the laser beam is focused into a very small spot, so that a high power density is achieved at the focus, and the
SUP20S welding system packaging a total of three layers, this paper describes the relevant accessories and major parts of the configuration and roleProtect the lenses 10/nozzle 82 power switches1 ground clipThe system line comes standard at 10 metersWelding gun 1A set of systems1 displayThe first la