LASER NEWS

Nozzle, also called copper nozzle, is one of the most important parts in laser cutting. The nozzle is located at the lower end of the cutting head. Both the laser beam and the auxiliary gas act on the cutting material through the nozzle. Its main function is to gather the auxiliary gas and form a hi

MOPA (Master Oscillator Power-Amplifier) laser refers to a laser structure in which a laser oscillator and an amplifier are cascaded. In industry, MOPA laser refers to a unique, more "intelligent" nanosecond pulsed fiber laser composed of a semiconductor laser seed source and fiber amplifier driven by electrical pulses.

Start-up process: open the air valve → open the air switch on the back of the device → release the emergency stop button on the panel → turn the key to the right to turn on the system power → press the water machine power button → press the laser power button, wait for 20 seconds before use .

Start-up process: open the air valve → open the air switch on the back of the device → release the emergency stop button on the panel → turn the key to the right to turn on the system power → press the water machine power button → press the laser power button, wait for 20 seconds before use .