Maxphotonics Q-Switched Pulse Fiber Laser Sources for Marking Machine 50W MFP-50W-H
10W-70W Q-SWITCH PULSED FIBER LASER-Leaflet.pdf
50W Q-SWITCH PULSED FIBER LASER
Product Description：
Q-switch series pulsed fiber laser is designed based on Q-switch oscillator and MOPA, offer a variety models from 10W-70W, and the peak power could reach 7KW. The laser is transmitted by fiber and isolator, and is controlled through a 25-pin interface. The Q-switched pulse fiber laser is suitable for intergration, and could meet the requirements of plastic marking, metal marking, engraving, coating removal,fine cutting, drilling, etc.
Excellent Single Pulse Energy
Higher single pulse energy makes our laser applicable to more types of materials and applications
New Compact and Rugged Design
>40% reduction in volume
Higher flexibility when integrated into system
Wide Application Even with Highly Reflective Material
High performance isolator effectively reduces reflection damage to the laser source
Smoothly marking on aluminum, copper and brass etc.
High Level Vertical Integration
All key components are designed and produced in house
Strict quality control, high consistency and reliability
Sample Show：
Communication jumper / cable / optical cable marking
Sheet Metal Processing
Cutting and welding of steel plates and tubes
Laser cutting of construction iron frames, cutting of doors and windows, cleaning of rust on iron frames, welding of iron frames
Laser cleaning of ships, laser cutting / welding of hulls
Sink / faucet / kitchenware stainless steel cutting and welding,Kitchenware panel character / graphic marking
Rings / necklaces / gold cutting, marking characters / patterns
Cutting and welding of metal billboards / advertising stands. Advertising character marking
Character marking for accessories such as mobile phones / tablets / computers and charging heads, internal antenna / middle board / camera welding. Volume hole perforation
The laser illuminates the object, and the internal structure emits changes. Laser irradiation promotes physical / chemical reactions of materials, laser fusion
Marking with forceps and scalpel,Medical equipment parts welding
Auto paint laser cleaning, repainting, car body welding, car body cutting, car interior control interface / button marking
Power battery tab cutting / welding, battery shell / pole / explosion valve welding
Laser scribing of solar panels
Flying marking of cans / plastic food packaging. Flying marking of plastic bottle
Chip number marking, chip scribing, laser trimming
Dial / back cover character / graphic marking, watch hands / gear / cutting
Fine marking / scribing of semiconductor device
| Models | MFP-10W | MFP-20W | MFP-30W | MFP-50W | MFP-70W |
| OPTICAL SPECIFICATIONS |
| Nominal Power | 10W | 20W | 30W | 50W | 70W |
| Mode of Operation | Pulsed |
| Polarization | Random |
| Power Tunability | 10 to 100% |
| Wavelength | 1064 ± 5 nm |
| Power Stability | ≤3 % |
| Laser Beam Quality M⊃2; | 1.2~1.5 | 1.3~1.8 |
| Pulse Energy | 0.45 mJ | 0.68 mJ | 1 mJ | 1.45 mJ |
| Pulse Duration | 80~120 ns | 100~140 ns |
| Repetition Rate | 20~60 kHz | 30~60 kHz | 50~80 kHz | 50~170 kHz |
| FIBER DELIVERY SYSTEM |
| Length | 1.9~3m standard, other lengths optional | 3m standard, other lengths optional |
| Beam Diameter | 6~8 mm |
| Beam Ellipticity | 90% |
| ELECTRICAL RATINGS |
| Supply Voltage | 24 VDC |
| OTHER SPECIFICATIONS |
| Operating Temperature | +10 to +42℃ |
| Storage Temperature | -10 to +60℃ |
| Humidity | 10 to 95% |
| Cooling Method | Air Cooling |
| Dimension | 345×266.2×120 mm |
| Weight | 10 kg | 12 kg |