The PLM500S is a smart focusing fiber cutting head from PORAD in the second half of 2018. Diversified interface settings enable it to be used with a variety of fiber lasers; all types of sensor data are monitored in real time on mobile APP.

PLM500SFeature

Diversified fiber interface

Highly dust-proof: fully enclosed wrap light path.

The internal airflow optimization optimizes cutting efficiency.

Four LED lights monitor the internal state of the cutting head in real time.

PLM500STechnical Parameters

Interface type: QBH, QD
Applicable fiber power: ≤10000W
Focusing lens focal length: 200mm
Focus adjustment range: +15mm ~ -20mm
Upper protective mirror specifications: ø21.5mm*2mm
Lower protective mirror specifications: ø37mm*7mm
Auxiliary gas pressure: ≤2.5MPa

PLM500S

▷ Diversified optical fiber interface.
▷ Highly dustproof: fully enclosed package light path.
▷ The internal air pressure and air flow are optimized to make the cutting efficiency higher.

▷ Four LED lights monitor the internal state of the cutting head in real time.

Parameters

Model	PLM200S	PLM300S	PLM500S	PoHeader
Interface Type	QBH、QD	QBH、QD	QBH、QD	Qplus
Fiber Power	≤2000W	≤4000W	≤10000W	≤30000W
Focus length	150mm	150mm	200mm	400mm
Focus adjustment	+9mm～-12mm	+9mm～-13mm	+15mm～-20mm	+20mm～-40mm
Drive Speed	≤ 110mm/s	≤ 150mm/s		Analog control
Acceleration Speed	≤10m/s2	≤10m/s2		Analog control
Upper Protective lens	ø24.9mm*1.5mm	ø24.9mm*1.5mm	ø21.5mm*2mm	ø40mm*2mm
Below Protective lens	ø30mm*5mm	ø30mm*5mm	ø37mm*7mm	ø50.8mm*7mm
Auxiliary Air Pressure	≤2.5MPa	≤2.5MPa	≤2.5MPa	≤2.5MPa