Raycus Small Fiber Core Series for cutting and welding
Raycus Small Fiber Core Series Lasers have a wall-plug efficiency of more than 40%. Meanwhile, the introduction of optimized second gener-ation fiber transmission system brings brighter beam, more stable beam quality and stronger anti-reflection ability.In EV battery welding, the welding of high-reflection materials, such as aluminum and copper, with Raycus Small Fiber Core Series Lasers could see more stable coupling ability, stronger penetration ability and bigger depth of fusion, bigger depth-to-width ratio, smaller welding deformation, and suppression of the formation of brittle intermetallic compound. As a result, they are suitable for precision welding of dissimilar materials.
| Model | RFL-C2000 | RFL- C3000 | RFL- C6000 |
RFL-C10000 | RFL-C12000 |
RFL-C30000 |
|
Average Output Power(W | 2000 | 3000 | 6000 | 10000 | 12000 | 30000 |
|
Wavelength (nm) | 1080±5 | 1080±5 | 1080±5 | 1080±5 | 1080±5 | 1080±5 |
|
Max. Modulation Frequency | 5 kHz | 5 kHz | 5 kHz | 5 kHz | 5 kHz | 5 kHz |
|
Output Power Stability （% | ±1.5 | ±1.5 | ±2 （25μm） ±1.5 （50μm | ±1.5 | ±1.5 | ±1.5 |
| Beam Delivery | QBH（Customizable） | QD（Customizable） | QP | |||
|
M⊃2; | ＜1.1 | ＜1.3 | BPP≤ 1.5mm×mrad （25μm） BPP≤ 2mm×mrad （50μm） | BPP= 1.5-2mm ×mrad （50μm） | BPP= 2-3mm×mrad （75μm） BPP= 3-4mm×mrad （100μm） | BPP= 3.5-5mm×mrad （100μm） BPP= 5-6mm×mrad （150μm） |
|
Polarization State | Random | |||||
|
Fiber Core (um) | 14(20、25 Customizable ） | 20 | 25/50 | 50 | 75/100 | 100/150 |
| Output cable length (m | 10 | 10 | 10 （25μm） 20 （50μm | 20 （Customizable） | 20 | |
Operation Voltage(V AC) | Three Phase 380VAC ±10% | Three Phase 380VAC ±10% | Three Phase 380VAC ±10% | Three Phase 380VAC ±10% | ||
|
Delivery Cable Length(m) | 5 （Customizable） | 5 （Customizable） | 10 （Customizable） | 10 （Customizable） | ||
|
Operation Voltage(V AC) | Single Phase 220VAC ±10%、50/60Hz AC | Single Phase 220VAC ±10%、50/60Hz AC | Single Phase 220VAC ±10%、50/60Hz AC | Three Phase 380VAC ±10%、50/60Hz AC | ||
| Control Method | RS-232、AD、Ethernet | |||||
| Dimensions (mm) | 414×686 ×158 | 485×900 ×237 | 560×1148×1269 | 100um: 1600×1570×1220 150um: 1200×1600×1230 | ||
| Cooling | Water cooling | Water cooling | Water cooling | Water cooling | Water cooling | Water cooling |
Applications：
Cutting
Welding
Punching
Medical device processing
Technical Advantages：
High power density
Good spot pattern
Maintenance-free
Wide modulation frequency range
Strong anti-reflection ability
Efficient thin plate cutting
Laser Nozzles Ceramic Holders Collimation/Focus lens Tube Tooling Kits Goggles Ceramic Locker Ring Seal Ring/Washer