What accessories are required for laser marking machines

What accessories are required for laser marking machines

Laser marking machines, as the name suggests, are equipment used by laser marking machine manufacturers to carry out marking work on products. This type of equipment is used for marking in the form of lasers and has a wide range of applications. However, if you don't look at it, it's just a small mark. The entire equipment requires multiple accessories, and different accessories can directly affect the marking quality and work efficiency. So, what accessories do laser marking machines require?

1、 Laser

The laser is the core accessory of the laser marking machine and the power source of the laser marking machine. Depending on the model, it usually has many lasers with different light sources, such as fiber optics, ultraviolet, CO2, YAG, semiconductors, etc. A laser with higher configuration has advantages such as higher marking efficiency, more reliable quality assurance, longer service life, and lower maintenance costs.

2、 Laser tube

This is also the heart of the laser marking machine. The price of imported laser tubes is very expensive, usually in the tens of thousands of yuan. So most laser welding machine manufacturers use domestically produced laser tubes. The quality of domestically produced laser tubes varies greatly, with a significant price difference. The service life of laser tubes with better quality is generally around 8000 hours.

3、 Focusing system

The function of the focusing system is to focus parallel laser beams at a point, which is related to the power of the laser marking machine. It mainly uses f- θ Lens, different f- θ The marking effect and range vary depending on the focal length of the lens.

4、 Computer control system

The computer control system is the center of control and command for the entire laser marking machine, as well as the carrier for software installation. By coordinating and controlling the sound and light modulation system and the galvanometer scanning system, the workpiece marking process is completed.

5、 Galvanometer scanning system

The galvanometer scanning system is composed of two parts: an optical scanner and a servo control. Vibration lens composition: composed of three parts: stator, rotor, and detection sensor. The entire system is designed and manufactured using new technologies, materials, processes, and working principles.

6、 Marking control software control part

The laser marking machine software is used to control marking parameters, control the application interface for debugging, and operate all marking actions. The control system is the dominant operating system of the laser marking machine, and its quality determines the operational performance stability of the laser marking machine. It mainly controls the machine tool to achieve the movement of the X, Y, and Z axes, while also controlling the output power of the laser.

7、 Stepper motor

Regarding the marking accuracy of laser marking machines, some * * laser welding machine manufacturers choose imported stepper motors, while others are stepper motors produced by joint ventures. Some smaller enterprises usually have different brands.

8、 Sheet metal model

The model architecture of the entire device.

9、 Laser power supply

The laser power supply of the laser marking machine is a device that provides power for the laser, with an input voltage of AC220V alternating current. Installed in the control box of the marking machine.