LASER NEWS

These new fiber lasers are truly versatile tools for welding and cutting thick, thin and especially difficult-to-cut materials. With a power output of up to 6 kW and a complex range of optics, sensors and software, they are suitable for a wide range of industries.

The function of the clamp is to clamp the plate to move in the X and Y directions with the processing program, and the second is to ensure the stability of the plate during processing. Therefore, it is necessary to reasonably distribute the position of the clamps to clamp the plate, so that the clamps are evenly distributed, so as to prevent the clamps from being deviated to one side, causing the plate to be unstable and shaking, resulting in the generation of cutting ripples. The comparison of the clamping positions of the clamps is shown in Figure 8. Although this factor has a certain influence on the cutting corrugation, it is an avoidable influencing factor during the operation.

Scientists develop low-power nanoscale laser cutting technology that only requires 0.5-20 megawattsAt present, laser cutting technology is widely used in the processing of metal and non-metal materials, which can greatly reduce processing time, reduce processing costs and improve workpiece quality.

As a new technology, laser processing technology can be used for the processing of various metal and non-metal materials in the industrial field, especially materials with high hardness, high brittleness and high melting point. Compared with traditional processing methods, laser processing has the advantages of a wide range of processable materials, high processing efficiency, high processing accuracy, and small workpiece deformation.