LASER NEWS

Put the object in a certain temperature, humidity and pressure environment, and gradually reduce the temperature of the object. When the ambient temperature of the object drops below the "dew point temperature" of the environment, the moisture in the air gradually reaches a saturated state until dew is deposited on the surface of the object. This phenomenon is called dew condensation.

Otherwise, in the process of continuous use, the stain will absorb the laser light, causing the temperature of the stain to rise, forming a thermal lens phenomenon, which will affect the processing technology; if the pollution is serious, it will cause burns and damage to the coating of the lens.

1. There is no laser output suddenly during the working process, and the re-marking software displays "IPG system failure"Answer: 1) The processing material does not belong to the high-reflection material: replace the laser with another marking table that is confirmed to be normal for testing. If th

Common faults and solutions of Raycus medium and high power lasersLaser does not power up1.1 Please turn off the air switch of the laser and check the external power supply to ensure that the laser model is consistent with the instruction manual and the wiring is correct.1.2 Please turn on the air s