LASER NEWS

how the thickness of the metal plate exceeds 10mm, the verticality of the cutting edge is very important. When moving away from the focal point, the laser beam becomes divergent and widens towards the top or bottom depending on the position of the focal point. The cutting edge is a few millimeters off the vertical, and the more vertical the edge, the better the quality of the cut.

Gear assembly form
Fiber laser welding has the characteristics of fast welding speed, small deformation after welding, and no need for post-weld treatment. It is widely used in all walks of life in the national economy. Wuhan Raycus Fiber Laser Technology Co., Ltd. is a company specializing in the research and development and production of fiber lasers, and at the same time provides customers with a wide range of technical support for different applications. Providing customers with high-quality fiber lasers is the driving force behind the continuous efforts and advancement of Raycus people.

Put the object in a certain temperature, humidity and pressure environment, and gradually reduce the temperature of the object. When the ambient temperature of the object drops below the "dew point temperature" of the environment, the moisture in the air gradually reaches a saturated state until dew is deposited on the surface of the object. This phenomenon is called dew condensation.

Otherwise, in the process of continuous use, the stain will absorb the laser light, causing the temperature of the stain to rise, forming a thermal lens phenomenon, which will affect the processing technology; if the pollution is serious, it will cause burns and damage to the coating of the lens.