+86-18024499925
PRODUCTS
You are here: Home » Laser Consumables » Goggles » Laser Safety Goggles Protective Glasses Shield Protection Eyewear For YAG DPSS

Product Category

Random Products

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button

Laser Safety Goggles Protective Glasses Shield Protection Eyewear For YAG DPSS

Optical Density : 200 - 540nm OD 5+

LB-Rating :315 - 540nm DIRM LB5

Transmittance : 50%

Available for:266nm, 355nm, 515nm, 532nm etc.,

Application:excimer, ultraviolet, Argon, KTP

According :CE EN207Optical Density : 200 - 540nm OD 5+

LB-Rating :315 - 540nm DIRM LB5

Transmittance : 50%

Available for:266nm, 355nm, 515nm, 532nm etc.,

Application:excimer, ultraviolet, Argon, KTP

According :CE EN207
Availability:
Quantity:
Product Description

Laser Safety Goggles Protective Glasses Shield Protection Eyewear For YAG DPSS Fiber Laser

Products Description
To understand what laser safety glasses to purchase, the most important parameter is your laser's wavelength (or wavelength range). Often, a laser has two wavelengths affiliated with it: The aiming beam wavelength - the aiming beam is typical "eye-safe" | depicted in the image below as red The operating beam wavelength - the operating beam requires proper laser safety protection | depicted in the image below as green
Specification
Select the corresponding protective goggles according to the laser wavelength. If the laser has only one wavelength, it is recommended to choose single-band protective goggles. If the laser is a multi-wavelength laser, it is recommended to choose a dual-band laser safety goggle.

Optical Density : 200 - 540nm OD 5+

LB-Rating :315 - 540nm DIRM LB5

Transmittance : 50%

Available for:266nm, 355nm, 515nm, 532nm etc.,

Application:excimer, ultraviolet, Argon, KTP

According :CE EN207

Why do you need laser protective glasses (necessity!)
①Laser protective glasses, the purpose is to prevent laser.
②There are usually two kinds of lasers, the lasers between 400nm-780nm is visible light, the light can be seen. Lasers above 780nm are infrared light and are usually invisible.
③ High-energy laser, the most common is optical 1064nm(fiber);10600nm(co2 laser), invisible to human eyes. For example, suppose that the light hits the human eye, and the human eye does not respond at all, and does not know timely plevent it by closing the eyes. If the laser energy is slightly stronger at this time, it may cause blindness. (The phenomenon is: I suddenly went blind without noticing it).

Mention: If you value your eyes, these things are the real deal.
① When conducting high-energy laser experiments and research, not only must wear protective glasses,but also no reflective objects on the whole body. Such as watches.
②Laser protective glasses are mainly used to prevent laser spots and stray light. Even if you wear laser protective glasses, people cannot look directly at the laser.
③Please do not look directly at the laser, otherwise it will cause irre-versible and permanent eye damage.


B

F
LF



Previous: 
Next: 

LASER OPTICS

Laser Accessories&Consumables

QUICK LINKS

Copyrights © 2020 LASERHOME.COM   All rights reserved.  Sitemap