Availability: | |
---|---|
Quantity: | |
SG2206
sino galvo
Sino Galvo High speed auto-focus galvo laser head SG2206 High-speed Galvo for fiber laser marking engraving machine
SG2206 type galvanometer has good running stability, high positioning accuracy, fast marking speed, strong anti-interference ability and strong comprehensive performance. The specific characteristics are as follows:
■ Adopt photoelectric sensor imported from the United States.
■ Differential photoelectric sensor accurately detects the position of the motor rotor, with good linearity, small drift, high resolution and repeated positioning accuracy.
■ Precise load design for 10mm lens, high motor assembly precision, reasonable structure, small static friction coefficient and zero offset, to ensure good dynamic characteristics of the system.
■ The driver has the function of position and speed advance detection, which greatly improves the dynamic response performance and scanning speed of the whole system.
■ Designed with overload, overcurrent and reverse polarity protection, making the system more reliable.
■ The whole system adopts electromagnetic compatibility optimization design, with high signal-to-noise ratio and strong anti-interference ability.
■ Solve common problems such as galvanometer motor temperature drift, signal interference and zero drift.
Technical Parameters:
Speed | ||
Marking Speed(1) | 6000mm/s | |
Writing Speed(2) | 516cps | |
Step Response Time(1% of full scale) | 288us | |
Step Response Time(10% of full scale) | 895us | |
Tracking Error Time | ≤164us | |
Precision and Error | ||
Linearity | 99.9% | |
Repeatability (RMS) | <8μRad | |
Gain Error | <5mRad | |
Zero Offset | <5mRad | |
Long-term Drift Over 8 Hours | <0.5mRad | |
Scale Drift | <40PPM/℃ | |
Zero Drift | <15μRad/℃ | |
Wavelength(3) | 10600nm / 1064nm / 355nm | |
Power and Signal | ||
Input Voltage | ±15VDC | |
Rated Current | 2A | |
Interface Signal | Digital | XY2-100 |
Analog | ±5V | |
Machinery Scan Angle(4) | ±11° | |
Working Current, Temperature, Dimension | ||
Working Temperature | 0℃--45℃ | |
Storage Temperature | -10℃--60℃ | |
Aperture | 10mm | |
Galvanometer Scanner Dimension (LxWxH) | 118.5x96.5x93.6mm | |
Galvanometer Scanner Weight | ≈1.65Kg |
Remarks:
The above parameters are obtained from the test after 30min of heating
(1) Use F-Theta lens, focal length 160mm, mark 2mm high single-line characters;
(2) Using F-Theta lens, the focal length is 160mm, and the number of single-line characters of 1mm height is marked per second;
(3) Special wavelength coating can be customized;
(4) The standard mechanical scanning angle is ±11°, and the Max mechanical scanning angle is ±15°, which can be customized if there are special requirements.