Availability: | |
---|---|
Quantity: | |
FSCUT 2000
FSCUT
Fscut 2000 Medium Power Laser Cutting Control System
FSCUT2000C laser cutting control system User Manual.pdf
FSCUT2000 is a high-performance open loop laser control system developed independently by Shanghai Friendess Electronic Technology Co., Ltd. It is widely used in the field of metal and non-metal laser cutting. Because of its outstanding performance in the field of medium power fiber laser cutting, it is favored by a large number of high quality customers.
FSCUT2000 laser cutting control system is composed of standard accessories as shown below:
Description | Model | Amount |
Motion control card | BMC1604V2 | 1 |
Terminal board | BCL3766 | 1 |
15-Pin cable (2.5m) | C15-2.5 | 2 |
37-Pin cable (2m) | C37-2 | 1 |
62-Pin cable (2m) | C62-2 | 1 |
Servo cable (2.5m) | C15-2.5 | 4 |
Laser software | CypCut | 1 |
Wireless remote | WKB V6 | 1 |
CNC panel | BCS100 | 1 |
Amplifier | BCL-AMP | 1 |
SPC | SPC-140 | 2 |
Technical parameters:
Model | FSCUT2000 |
Motion Control card | BMC1604v2 |
I/O terminal board | BCL3766 |
Motor control signal | 4 axis with high-speed pulse output and maximum frequency3MHz |
3 axis with encoder feedback channel and four times, frequency up to 8MHz | |
The original point of every axis with limit, servo alarm special input signal. | |
The servo performance of every axis, alarm clear special output signal. | |
Control cycle is 1ms. | |
Motion control performance | “S” speed-up and speed-down with wave filtering. |
Velocity look-ahead, inflection point with intelligent speed-up and speed-down. | |
The speed limit of small circular arc, Local curvature analysis | |
The smoothing of turning | |
Laser control signal | Output 1 is PWM signal, with dip switch choosing 24V or 5V |
Output 2 is 0~10V analog signal. | |
I/O Function | 12 general inputs. |
20 general outputs, thereto, 8 interfaces are relay outputs,12 interfaces are mosfet emitter outputs. | |
Work environment | Temperature: 0~55℃ |
humidity: 5%~90%, no condensation Power | |
Power requirement | 24V DC/2A |
Application:
Applicable to 1500W ~ 6000W medium power fiber laser cutting machine, widely used in fabricating industries of metal workpiece, kitchen utensils, lamps, cabinets and more.